Language Selector

Construction sheet steel

Fields of use

Construction sheet steel is used where components with high strength values and impact energy ratings are required at -40°C. Thanks to the outstanding mechanical properties, constructions with lower wall thicknesses can be produced, which saves weight. This is suitable for vehicle construction, hoists, cranes, etc.

Description

Wear plates are low-alloy, tempered and quenched steel sheets. They can be welded, bent, drilled and cut. Construction sheet steel is not intended for further thermal treatments.

Products

Stahl-Contor AG stocks Weldox as a quarto plate and Domex as a strip plate.

Product offers from Stahl-Contor from the Embrach service centre

&nb

DescriptionDimensions off the shelfTypical values
Quend 7006mm to 40mmQuarto plate with yield stress of 700MPA and impact energy measured at -40°C, corresponding to S690QL
Quend 90040mmQuarto plate with yield stress of 900MPA and impact energy measured at -40°C, corresponding to S690QL
Quend 9604mm to 15mm
with request
Quarto plate with yield stress of 960MPA and impact energy measured at -40°C, corresponding to S960QL
Weldox 700E8mm to 80mmQuarto plate with yield stress of 700MPA and impact energy measured at -40°C, corresponding to S690QL
Weldox 900E5mm to 50mmQuarto plate with yield stress of 900MPA and impact energy measured at -40°C, corresponding to S690QL
Weldox 960E5mm to 40mmQuarto plate with yield stress of 960MPA and impact energy measured at -40°C, corresponding to S960QL
Domex 700MC5mmStrip plate with yield stress of 700MPA
Domex Bor3mm to 12mmStrip plate with yield stress of 400MPA, cold-rolled state

 

 

 

[Translate to English:]

Aktuell

 

- Stahl-Contor AG am Ostschweizer
  Technologiesymposium! Mehr

- Neu! Schweissfülldrähte! Mehr
  Unser Angebot (.pdf)

- Neu! Verbundbleche /
  geschweisste Verschleissplatten
  Mehr

- Rechnung per PDF! Mehr

- Aktuelle Lagerliste! Mehr